Translucent Sheets
I.T.4
Spects: (3m x 0.84m)
Matt 450gsm
I.T.5
Specs: 3m x 0.84m
Matt 450gsm
Super 6
Spects: (3m x 0.84m)
Matt 450gsm
INSTRUCTION FOR FIXING AND MAINTENANCE
Cutting & Drilling
Fiberlite roofing sheets may be cut by hand or by power saws.
When cutting by hand, a fine tooth blade must be used,
held at a shallow angle to the panel. When using power tools,
the best results will be obtained with a 44 to 60 grit
abrasive disc, operating at approximately 3700 rlmin.
Saw operators should wear dust-filter masks and safety glasses or
goggles. Fiberlite roofing sheets may be fixed around obstructions
using standard tin snips. Holes should be drilled, not
punched. Such holes should be drilled 3mm oversize to allow for
thermal movement: large bonded washers should be used to protect against the ingress of moisture.
Cleaning – To ensure a long life of high quality, the roofing sheets
must be cleaned with water periodically, the frequency of
which will depend on static and environmental conditions.
Detergents may be used if necessary. Persistent stains may be
removed by rubbing with bristle brush – not a wire brush.
Tar or grease deposited from industrial atmospheres may
be removed with white spirit.
Repairs – Small holes or tears may be patched with resin and
fibreglass chopped strand mat (glass-fibre reinforcement material).
Thickness available
- 450g – Light Duty
- 600g – Medium Duty
- 900g – Heavy Duty
Deciding between an porcelain or
fiberglass bathtub? Well, it’s difficult to
choose a winner, but fiberglass bathtub
are trending among contractors because
they offer multiple advantaged over cast
iron or porcelain bathtubs. Fiberglass
bathtub could offer plenty of shapes that
could satisty the most demanding
homeowner and interior designer.
In addition to that, fiberglass bathtubs are
generally less expensive than other
bathtub types.
Fiberglass bathtubs can be fabricated
faster than any other, thus the pricing is
so affordable. As added value, fiberglass
bathtubs can be found on just any shape
and color. This type of bathtubs can be
manufactured almost five times thicker
than other bathtubs providing excellent
oxidizing protection, and will not discolor
through the years. lf you are planning a
remodeling job in places where you
might find space limitations, or condos
with lots of stairs and hallways, they
could be the best alternative to use
because they are not as heavy as other
bathtubs.